| 7216.32.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - I sections - Of a height exceeding 152.4 mm | KGM | | |
| 7216.33.00 | 91 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | | |
| 7216.33.00 | 92 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 11 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 12 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 21 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height of 80 mm or more but not exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 22 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height exceeding 152.4 mm | KGM | | |
| 7216.50.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded - Shapes or sections, with bevelled edge or edges, of a length of more than 3.65 m and either of a width of more than 25.4 cm or of a thickness of more than 3.5 cm, for use in the manufacture of cutting edges for bulldozer or angledozer blades, front-end shovel loader buckets, combination excavating and transporting scrapers, road graders or road scrapers | KGM | | |
| 7219.12.00 | | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm | KGM | Free | CCCT, LDCT |
| 7219.12.00 | 11 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a thickness of 4.75 mm or more but not exceeding 6.35 mm: - Of a width of 600 mm or more but not exceeding 1,250 mm | KGM | | |
| 7219.12.00 | 12 | Flat-rolled products of stainless steel, of a width of 600 mm or more. - Not further worked than hot-rolled, in coils: - Of a thickness of 4.75 mm or more but not exceeding 10 mm - Of a thickness of 4.75 mm or more but not exceeding 6.35 mm: - Of a width exceeding 1,250 mm | KGM | | |
| 7225.11.00 | 10 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Of silicon-electrical steel: - Grain-oriented - Cold-rolled or cold-drawn, of a thickness not exceeding 4.75 mm | KGM | | |
| 7225.19.00 | 10 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Of silicon-electrical steel: - Other - Cold-rolled or cold-drawn, of a thickness not exceeding 4.75 mm | KGM | | |
| 7225.40.00 | 21 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Of a thickness not exceeding 4.75 mm | KGM | | |
| 7225.40.00 | 22 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other, tool steel: - Of a thickness exceeding 4.75 mm | KGM | | |
| 7225.40.00 | 93 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm | KGM | | |
| 7225.40.00 | 94 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other: - Of a width exceeding 2,450 mm | KGM | | |
| 7225.50.00 | 11 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of a thickness not exceeding 4.75 mm: - Tool steel | KGM | | |
| 7225.50.00 | 19 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of a thickness not exceeding 4.75 mm: - Other | KGM | | |
| 7225.50.00 | 21 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of thickness exceeding 4.75 mm: - Tool steel | KGM | | |
| 7225.50.00 | 29 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than cold-rolled (cold-reduced) - Of thickness exceeding 4.75 mm: - Other | KGM | | |
| 7226.91.00 | 10 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Other: - Not further worked than hot-rolled - Tool steel, of a thickness not exceeding 4.75 mm | KGM | | |
| 7304.29.00 | 11 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification | KGM | | |
| 7304.29.00 | 19 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Other | KGM | | |
| 7304.29.00 | 21 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 177.8 mm but not exceeding 298.5 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification | KGM | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
