Home|Add to Favorites|Add to My Toolkit
International Trade|Register|Sign in|Customization
  190/301         
Sharing buttons for facebookSharing buttons for twitterSharing buttons for Google plus
HS Code and Harmonized Tariff Schedule of Canada
HS NoSS Description of Goods Unit of Meas.  MFN Tariff Applicable Preferential Tariffs
7326.90.9021Other articles of iron or steel. - Other - Other - Other, material handling equipment: - Racks-  
7326.90.1080Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Tracks, for use in the manufacture of skid steer loaders-  
8309.90.0010Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal. - Other - Aluminum can lids, to be employed in packaging beverage products in drawn aluminum cans; Aluminum can lids, with an easy-open feature, for use in the manufacture of food cans; Roll-on pilfer proof aluminum closures, 30 mm diameter x 35 mm deep and 35 mm diameter x 32 mm deep, to be employed in packaging beverage products in bottles; Steel can lids, having a full panel easy-open feature, for use in the manufacture of food cans; Steel covers, for use in the manufacture of tops and bottoms of welded aerosol containers-  
7326.90.1090Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles - Other-  
74.10 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm.   
7410.11.00 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copperKGMFreeCCCT, LDCT
7410.11.0040Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copper - Of a thickness exceeding 0.025 mm but not exceeding 0.15 mm, unworked, of a width not exceeding 508 mmKGM  
7410.11.0090Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of refined copper - OtherKGM  
7410.12.00 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloysKGMFreeCCCT, LDCT
7410.12.0040Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloys - Of a thickness exceeding 0.025 mm but not exceeding 0.15 mm, unworked, of a width not exceeding 508 mmKGM  
7410.12.0090Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Not backed: - Of copper alloys - OtherKGM  
7410.21.00 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copperKGMFreeCCCT, LDCT
7411.10.0020Copper tubes and pipes. - Of refined copper - For refrigeration or air conditioning (ACR), unworkedKGM  
7410.21.0030Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copper - Copper clad laminates, workedKGM  
7410.21.0090Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of refined copper - OtherKGM  
7410.22.0000Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm. - Backed: - Of copper alloysKGMFreeCCCT, LDCT
74.15 Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper.   
7415.10.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Nails and tacks, drawing pins, staples and similar articlesKGMFreeCCCT, LDCT
7415.21.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other articles, not threaded: - Washers (including spring washers)KGMFreeCCCT, LDCT
7415.29.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other articles, not threaded: - OtherKGMFreeCCCT, LDCT
7415.33.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other threaded articles: - Screws; bolts and nutsKGMFreeCCCT, LDCT
7415.39.0000Nails, tacks, drawing pins, staples (other than those of heading 83.05) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper. - Other threaded articles: - OtherKGMFreeCCCT, LDCT
7419.91.9100Other articles of copper. - Other: - Cast, moulded, stamped or forged, but not further worked - Other: - For use in Canadian manufacturesKGMFreeCCCT, LDCT
7601.10.0010Unwrought aluminum. - Aluminum, not alloyed - Billets, blocks, ingots, notched bars, pigs, slabs and wire bars: - Billets, blocks, pigs, slabs and wire bars; Granules, cut from ingots, for use in the manufacture of cleaning compounds; GrainKGMFreeCCCT, LDCT
7606.12.0010Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm. - Rectangular (including square): - Of aluminum alloys - Coated sheets or strip, for use in packaging fish products, in drawn aluminum cans with a full panel key open feature; Coated sheets or strip, for use in packaging beverage products, in drawn aluminum cansKGMFreeCCCT, LDCT
 190/301          




Top Use:    Harmonized Tariff Schedule of the Canada inquiry:  aircraft+parts

Recent user inquiry:



I want to Post a new feedback