Home|Add to Favorites|Add to My Toolkit|Register|Sign in|Customization




 
HS Code and Harmonized Tariff Schedule of Canada 
Enter either the first part of an HTS category number up to 8 digits or any part of a product description.    
    

 



  8/13         
Sharing buttons for facebookSharing buttons for twitterSharing buttons for Google plus
HS Code and Harmonized Tariff Schedule of Canada
HS NoSS Description of Goods Unit of Meas.  MFN Tariff Applicable Preferential Tariffs
8458.11.0011Lathes (including turning centres) for removing metal. - Horizontal lathes: - Numerically controlled - Chucking lathes: - Single spindle, of a power not exceeding 18.64 kWNMBFreeCCCT, LDCT
8458.11.0012Lathes (including turning centres) for removing metal. - Horizontal lathes: - Numerically controlled - Chucking lathes: - Single spindle, of a power exceeding 18.64 kWNMBFreeCCCT, LDCT
8458.11.0021Lathes (including turning centres) for removing metal. - Horizontal lathes: - Numerically controlled - Other, having a swing of less than 43 cm: - Of a power not exceeding 18.64 kWNMBFreeCCCT, LDCT
8458.11.0022Lathes (including turning centres) for removing metal. - Horizontal lathes: - Numerically controlled - Other, having a swing of less than 43 cm: - Of a power exceeding 18.64 kWNMBFreeCCCT, LDCT
8458.11.0031Lathes (including turning centres) for removing metal. - Horizontal lathes: - Numerically controlled - Other, having a swing of 43 cm or more: - Of a power not exceeding 18.64 kWNMBFreeCCCT, LDCT
8458.11.0032Lathes (including turning centres) for removing metal. - Horizontal lathes: - Numerically controlled - Other, having a swing of 43 cm or more: - Of a power exceeding 18.64 kWNMBFreeCCCT, LDCT
8460.90.9100Machine-tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal, or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading 84.61. - Other - Other: - Belt type sanding machines of a belt width of 50.8 mm or more but not exceeding 152.4 mm; Polishing machines of a power not exceeding 7.5 kW; Ski edge sharpening machines; Tumbling, deburring and finishing machinesNMBFreeCCCT, LDCT
8467.21.0010Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor. - With self-contained electric motor: - Drills of all kinds - Rotary, battery poweredNMBFreeCCCT, LDCT
8467.22.0010Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor. - With self-contained electric motor: - Saws - Circular saws, capable of accommodating blades with diameters of 152 mm or more but not exceeding 254 mm, powered by alternating current; Rail saws, for cutting railway railsNMBFreeCCCT, LDCT
8467.89.0010Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor. - Other tools: - Other - Hydraulic powered tools, other than rock drills, stoper drills with feed legs, sinker drills, paving breakers, spaders or diggersNMBFreeCCCT, LDCT
8467.89.0092Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor. - Other tools: - Other - Other: - Gasoline powered grass and weed trimmers and brush cutters, powered by an engine of a cylinder capacity not exceeding 30 ccNMBFreeCCCT, LDCT
8467.89.0093Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor. - Other tools: - Other - Other: - Gasoline powered grass and weed trimmers and brush cutters, powered by an engine of a cylinder capacity exceeding 30 ccNMBFreeCCCT, LDCT
8470.10.0000Calculating machines and pocket-size data recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers. - Electronic calculators capable of operation without an external source of electric power and pocket-size data recording, reproducing and displaying machines with calculating functionsNMBFreeCCCT, LDCT
8479.89.4100Machines and mechanical appliances having individual functions, not specified or included elsewhere in this Chapter. - Other machines and mechanical appliances: - Other - Trash compactors: - Industrial solid waste compactors; Waste or refuse compactors, electrically powered, utilized on aircraft, trains, ships or buses, capable of crushing bottles and other in-transit wasteNMBFreeAUT, NZT,
8479.90.1100Machines and mechanical appliances having individual functions, not specified or included elsewhere in this Chapter. - Parts - Of the goods of tariff item No. 8479.89.41 or 8479.89.49: - Frame assemblies incorporating at least two of the following: baseplate, side frames, power screws or front plates-FreeCCCT, LDCT
8481.10.0030Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves. - Pressure-reducing valves - Pneumatic-fluid power type except for gas-fired apparatus: - Pneumatic-fluid power type, except for gas-fired apparatus-FreeCCCT, LDCT
8483.10.0011Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks - Transmission shafts, excluding cam shafts and main shafts or driving shafts, for use with the tractors of heading 87.01 powered by an internal combustion engine, excluding road tractors for semi-trailers and log skidders: - Crank-shafts-FreeCCCT, LDCT
8483.10.0019Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks - Transmission shafts, excluding cam shafts and main shafts or driving shafts, for use with the tractors of heading 87.01 powered by an internal combustion engine, excluding road tractors for semi-trailers and log skidders: - Other-FreeCCCT, LDCT
8501.32.2000Electric motors and generators (excluding generating sets). - Other DC motors; DC generators: - Of an output exceeding 750 W but not exceeding 75 kW - Motors for use as the primary source of mechanical power for electric powered vehicles of subheading 8703.90NMBFreeCCCT, LDCT
8501.40.0010Electric motors and generators (excluding generating sets). - Other AC motors, single-phase - External rotor permanent split capacitor motors, of a power exceeding 30 W or more but not exceeding 120 W, for use in the manufacture of cooker (range) hoods; Gear motors, for use in the manufacture of machinery or equipment; Other motors, for use in the manufacture of submersible water pump systems, with a pump diameter exceeding 8.89 cmNMBFreeCCCT, LDCT
8502.20.0010Electric generating sets and rotary converters. - Generating sets with spark-ignition internal combustion piston engines - For use on the farm, for farm purposes only; Ground power units, for providing electrical power for aircraft; Of an output not exceeding 35 kWNMBFreeCCCT, LDCT
8502.31.0000Electric generating sets and rotary converters. - Other generating sets: - Wind-poweredNMBFreeCCCT, LDCT
8504.21.0010Liquid dielectric transformers: - Electrical transformers, static converters (for example, rectifiers) and inductors. - Having a power handling capacity of less than 500 kVANMBFreeCCCT, LDCT
8504.21.0020Liquid dielectric transformers: - Electrical transformers, static converters (for example, rectifiers) and inductors. - Having a power handling capacity of 500 kVA or more but not exceeding 650 kVANMBFreeCCCT, LDCT
8504.22.0010Liquid dielectric transformers: - Electrical transformers, static converters (for example, rectifiers) and inductors. - Having a power handling capacity exceeding 650 kVA but not exceeding 2,500 kVANMBFreeCCCT, LDCT
 8/13          




Top Use:    Harmonized Tariff Schedule of the Canada inquiry:  console

Recent user inquiry:



I want to Post a new feedback