Home|Add to Favorites|Add to My Toolkit|Register|Sign in|Customization




 
HS Code and Harmonized Tariff Schedule of Canada 
Enter either the first part of an HTS category number up to 8 digits or any part of a product description.    
    

 



  4/4         
Sharing buttons for facebookSharing buttons for twitterSharing buttons for Google plus
HS Code and Harmonized Tariff Schedule of Canada
HS NoSS Description of Goods Unit of Meas.  MFN Tariff Applicable Preferential Tariffs
3909.40.0090Amino-resins, phenolic resins and polyurethanes, in primary forms. - Phenolic resins - OtherKGMFreeCCCT, LDCT
3909.50.00 Amino-resins, phenolic resins and polyurethanes, in primary forms. - PolyurethanesKGMFreeCCCT, LDCT
3909.50.0010Amino-resins, phenolic resins and polyurethanes, in primary forms. - Polyurethanes - CompositionsKGMFreeCCCT, LDCT
3909.50.0090Amino-resins, phenolic resins and polyurethanes, in primary forms. - Polyurethanes - OtherKGMFreeCCCT, LDCT
3911.90.0010Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms. - Other - To be employed in removing salts or water from crude petroleum oils; Hydrocarbon resins, excluding compositions and hydrocarbon resins with a number average molecular weight of less than 2,000, a mixed aniline point between 30°C and 60°C and a ring and ball softening point of less than 130°C as determined by ASTM E 28; Paratertiobutyl phenol disulfide polymer, for use in the manufacture of rubber pneumatic tires; Resin hardener, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generatorsKGMFreeCCCT, LDCT
3919.10.9100Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. - In rolls of a width not exceeding 20 cm - Other: - Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05 or 39.06;Of polymers of heading 39.07, excluding of epoxide resins, of unsaturated polyesters, or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose or of vulcanized fibre;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Polyester or polystyrene film, of a thickness not exceeding 0.25 mm, for use in the manufacture of loud-speakers or audio-frequency electric amplifiers, record-players or magnetic tape transcribing machines, magnetic tape sound recording apparatus, tape transport mechanisms, electrical equipment of heading 85.21, 85.25, 85.26, 85.27 or 85.28, and parts of the foregoing, including transformers and inductors;Strips of polyurethane for use in the manufacture of clothingKGMFreeCCCT, LDCT
3919.90.9100Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. - Other - Other: - Film of polymers of vinyl chloride, of a thickness not exceeding 0.10 mm and in rolls of a width not exceeding 153 cm;Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05;Of polymers of heading 39.06, excluding of polymers of methyl methacrylate;Of polymers of heading 39.07, excluding of epoxide resins, of unsaturated polyesters, or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose, of vulcanized fibre or cellulose acetate or cellulose acetate butyrate sheets, film or strip, of a thickness exceeding 0.08 mm or of a width of less than 15 cm and a thickness not exceeding 0.08 mm;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Strips of polyurethane for use in the manufacture of clothingKGMFreeCCCT, LDCT
3920.94.0000Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials. - Of other plastics: - Of phenolic resinsKGMFreeCCCT, LDCT
3921.90.1100Other plates, sheets, film, foil and strip, of plastics. - Other - Combined with knitted or woven fabrics, nonwovens or felt, such combinations which can, without fracturing, be bent manually around a cylinder of a diameter of 7 mm, at a temperature between 15°C and 30°C: - Belting, of a thickness not exceeding 2.8 mm and a width exceeding 350 mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts;Combined with felt, nonwovens or textile fabrics, with a leather-like coating solely of polyurethane on one or both sides, the weight of the coating being 20% or more of the total weight of the coated fabric, for use in the manufacture of footwear or handbags;Combined with woven fabrics of cotton, impregnated and coated with polymers of vinyl chloride, with the weight of the unimpregnated/uncoated fabric not exceeding 120 g/m² and the total weight of the impregnated/coated fabric exceeding 430 g/m² but not exceeding 470 g/m², for use in the manufacture of apparel;Combined with woven fabrics, solely of polyester staple fibres or of cotton mixed solely with polyesters or of polyester staple fibres mixed solely with cotton, for use in the manufacture of family or recreational tents of a floor area of 3 m² or more but not exceeding 21 m²;Plates, sheets or film of polymers of tetrafluoroethylene, combined with a woven fabric, to be employed in the production of chlorine or sodium hydroxide;Sheets of uncured phenol-formaldehyde resin or uncured epoxide resins, containing glass fibres, commonly known as "prepeg", for use in the manufacture of composite sandwich panels for aircraft, fast ferry ships and air transport shelters;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission beltsKGMFreeCCCT, LDCT
3921.90.9100Other plates, sheets, film, foil and strip, of plastics. - Other - Other: - Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05;Of polymers of heading 39.06, excluding of polymers of methyl methacrylate;Of polymers of heading 39.07, excluding of epoxide resins or of unsaturated polyesters, or poly(ethylene terephthalate) film of a width of less than 15 cm or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose, of vulcanized fibre or cellulose acetate and cellulose acetate butyrate sheets, film or strip, of a thickness exceeding 0.08 mm or of a width less than 15 cm and a thickness not exceeding 0.08 mm;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Sheeting of glass fibre reinforced epoxide resin, whether or not in the form of ripple springs, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generators;Sheets, consisting of plain, coloured or decorated paper, coated or impregnated with melamine-formaldehyde resins, to be used as decorative surface coverings for particleboard, fibreboard or similar panel board products for the manufacture of furniture;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission beltsKGMFreeCCCT, LDCT
4411.92.10 Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. - Other: - Of a density exceeding 0.8 g/cm³ - Not mechanically worked or surface covered; Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle boardKGMFreeCCCT, LDCT
4411.92.1011Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. - Other: - Of a density exceeding 0.8 g/cm³ - Not mechanically worked or surface covered; Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle board - Not mechanically worked or surface covered: - DoorskinsKGMFreeCCCT, LDCT
4411.92.1019Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. - Other: - Of a density exceeding 0.8 g/cm³ - Not mechanically worked or surface covered; Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle board - Not mechanically worked or surface covered: - OtherKGMFreeCCCT, LDCT
4411.92.1021Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. - Other: - Of a density exceeding 0.8 g/cm³ - Not mechanically worked or surface covered; Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle board - Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle board: - DoorskinsKGMFreeCCCT, LDCT
4411.92.1029Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances. - Other: - Of a density exceeding 0.8 g/cm³ - Not mechanically worked or surface covered; Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle board - Resin impregnated, containing 17% or more by weight of phenol-formaldehyde resin, for use in the manufacture of overlaid plywood or overlaid particle board: - OtherKGMFreeCCCT, LDCT
 4/4          




Top Use:    Harmonized Tariff Schedule of the Canada inquiry:  console

Recent user inquiry:



I want to Post a new feedback