| 4412.94 | | Plywood, veneered panels and similar laminated wood. - Other: - Blockboard, laminboard and battenboard | | | |
| 4418.90.00 | 90 | Builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes. - Other - Other: - Other | - | 3% | CCCT, LDCT |
| 3921.90.11 | 00 | Other plates, sheets, film, foil and strip, of plastics. - Other - Combined with knitted or woven fabrics, nonwovens or felt, such combinations which can, without fracturing, be bent manually around a cylinder of a diameter of 7 mm, at a temperature between 15°C and 30°C: - Belting, of a thickness not exceeding 2.8 mm and a width exceeding 350?mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts;Combined with felt, nonwovens or textile fabrics, with a leather-like coating solely of polyurethane on one or both sides, the weight of the coating being 20% or more of the total weight of the coated fabric, for use in the manufacture of footwear or handbags;Combined with woven fabrics of cotton, impregnated and coated with polymers of vinyl chloride, with the weight of the unimpregnated/uncoated fabric not exceeding 120 g/m2 and the total weight of the impregnated/coated fabric exceeding 430 g/m2 but not exceeding 470 g/m2, for use in the manufacture of apparel;Combined with woven fabrics, solely of polyester staple fibres or of cotton mixed solely with polyesters or of polyester staple fibres mixed solely with cotton, for use in the manufacture of family or recreational tents of a floor area of 3 m2 or more but not exceeding 21 m2;Plates, sheets or film of polymers of tetrafluoroethylene, combined with a woven fabric, to be employed in the production of chlorine or sodium hydroxide;Sheets of uncured phenol-formaldehyde resin or uncured epoxide resins, containing glass fibres, commonly known as "prepeg", for use in the manufacture of composite sandwich panels for aircraft, fast ferry ships and air transport shelters;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission belts | KGM | Free | CCCT, LDCT |
| 3921.90.91 | 00 | Other plates, sheets, film, foil and strip, of plastics. - Other - Other: - Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05;Of polymers of heading 39.06, excluding of polymers of methyl methacrylate;Of polymers of heading 39.07, excluding of epoxide resins or of unsaturated polyesters, or poly(ethylene terephthalate) film of a width of less than 15 cm or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose, of vulcanized fibre or cellulose acetate and cellulose acetate butyrate sheets, film or strip, of a thickness exceeding 0.08 mm or of a width less than 15 cm and a thickness not exceeding 0.08 mm;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Sheeting of glass fibre reinforced epoxide resin, whether or not in the form of ripple springs, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generators;Sheets, consisting of plain, coloured or decorated paper, coated or impregnated with melamine-formaldehyde resins, to be used as decorative surface coverings for particleboard, fibreboard or similar panel board products for the manufacture of furniture;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission belts | KGM | Free | CCCT, LDCT |
| 44.12 | | Plywood, veneered panels and similar laminated wood. | | | |
| 4412.10 | | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo | | | |
| 44.18 | | Builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes. | | | |
| 4412.10.10 | | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - With at least one outer ply of non-coniferous wood | MTQ | 2% | CCCT, LDCT |
| 4412.10.10 | 10 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - With at least one outer ply of non-coniferous wood - Whether or not painted, edge or face worked, but not otherwise worked or surface covered | MTQ | 2% | CCCT, LDCT |
| 4412.10.10 | 90 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - With at least one outer ply of non-coniferous wood - Other | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | 11 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other - With at least one ply of tropical wood specified in Subheading Note 2 to this Chapter: - Whether or not painted, edge or face worked, but not otherwise worked or surface covered | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | 19 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other - With at least one ply of tropical wood specified in Subheading Note 2 to this Chapter: - Other | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | 21 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other - Containing at least one layer of particle board: - Whether or not painted, edge or face worked, but not otherwise worked or surface covered | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | 29 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other - Containing at least one layer of particle board: - Other | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | 91 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other - Other: - Whether or not painted, edge or face worked, but not otherwise worked or surface covered | MTQ | 2% | CCCT, LDCT |
| 4412.10.90 | 99 | Plywood, veneered panels and similar laminated wood. - Plywood consisting solely of sheets of wood, each ply not exceeding 6 mm thickness: - Of bamboo - Other - Other: - Other | MTQ | 2% | CCCT, LDCT |
| 4412.31 | | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter | | | |
| 4412.31.10 | 00 | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Unfinished, interior grade lauan mahogany plywood panels, of a thickness not exceeding 6.35 mm and of a width of 1.1 m or more, whether or not edge trimmed, but not otherwise further manufactured than sanded, for use in the manufacture of printed or overlaid wood-grained or patterned interior wall panelling | MTQ | Free | CCCT, LDCT |
| 4412.31.90 | | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Other | MTQ | 2% | CCCT, LDCT |
| 4412.31.90 | 11 | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Other - Whether or not painted, edge or face worked, but not otherwise worked or surface covered: - Doorskins of mahogany | MTQ | 2% | CCCT, LDCT |
| 4412.31.90 | 13 | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Other - Whether or not painted, edge or face worked, but not otherwise worked or surface covered: - Other, of mahogany | MTQ | 2% | CCCT, LDCT |
| 4412.31.90 | 19 | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Other - Whether or not painted, edge or face worked, but not otherwise worked or surface covered: - Other | MTQ | 2% | CCCT, LDCT |
| 4412.31.90 | 80 | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Other - Other doorskins of mahogany | MTQ | 2% | CCCT, LDCT |
| 4412.31.90 | 90 | Plywood, veneered panels and similar laminated wood. - Other plywood, consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm thickness: - With at least one outer ply of tropical wood specified in Subheading Note 2 to this Chapter - Other - Other | MTQ | 2% | CCCT, LDCT |
