| 7306.40.10 | 10 | Containing more than 0.5 percent by weight of nickel: | | | | |
| 7306.40.10 | 10 | Containing more than 1.5 percent but less than 5 percent by weight of molybdenum | kg | | | |
| 7306.40.50 | | Having a wall thickness of 1.65 mm or more | | Free | | 11% |
| 7306.40.50 | 40 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | kg | | | |
| 7306.40.50 | 42 | Containing less than 15 percent by weight of chromium | kg | | | |
| 7306.40.50 | 62 | With an outside diameter not exceeding 114.3 mm: | | | | |
| 7306.40.50 | 62 | Containing more than 0.5 percent but less than 24 percent by weight of nickel: | | | | |
| 7306.40.50 | 62 | Containing more than 1.5 per- cent but less than 5 percent by weight of molybdenum | kg | | | |
| 7306.40.50 | 85 | With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm: | | | | |
| 7306.40.50 | 85 | Containing more than 0.5 percent but less than 24 percent by weight of nickel | kg | | | |
| 7306.50.10 | 00 | Having a wall thickness of less than 1.65 mm | kg | Free | | 35% |
| 7306.50.30 | 00 | Having a wall thickness of 1.65 mm or more: | | | | |
| 7306.50.30 | 00 | Tapered pipes and tubes of steel principally used as parts of illuminating articles | kg | Free | | 45% |
| 7306.50.50 | 50 | With an outside diameter not exceeding 114.3 mm | kg | | | |
| 7306.50.50 | 70 | With an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | kg | | | |
| 7306.61.10 | 00 | Having a wall thickness of 4 mm or more: | | | | |
| 7306.61.50 | 00 | Having a wall thickness of less than 4 mm: | | | | |
| 7306.69.10 | 00 | Having a wall thickness of 4 mm or more: | | | | |
| 7306.69.50 | 00 | Having a wall thickness of less than 4 mm: | | | | |
| 7307 | | Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel: | | | | |
| 7307.11.00 | | Of nonmalleable cast iron | | 4.8% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 25% |
| 7307.19.30 | 70 | With mechanical, push-on (rubber compression) or flanged joints attached | kg | | | |
| 7307.21.10 | 00 | Not machined, not tooled and not otherwise processed after forging | kg | 3.3% | Free (A*,AU,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 34% |
| 7307.91.10 | 00 | Not machined, not tooled and not otherwise processed after forging: | | | | |
| 7307.91.50 | 10 | With an inside diameter of less than 360 mm: | | | | |
