| 7228.30.20 | 00 | Of tool steel (other than high-speed steel): | | | | |
| 7228.30.20 | 00 | Of ball-bearing steel | kg | Free | | 29% |
| 7228.30.40 | 00 | Of chipper knife steel, not cold-formed | kg | Free | | 28% |
| 7228.30.80 | 05 | Of high-nickel alloy steel | kg | | | |
| 7228.40.00 | 00 | Other bars and rods, not further worked than forged | kg | Free | | 28% |
| 7228.50 | | Other bars and rods, not further worked than cold- formed or cold-finished: | | | | |
| 7228.50.10 | | Of tool steel (other than high-speed steel) | | Free | | 29% |
| 7228.50.10 | 10 | Of ball-bearing steel | kg | | | |
| 7228.50.10 | 20 | With a maximum cross-sectional dimension of less than 18 mm: | | | | |
| 7228.50.10 | 20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | | | |
| 7228.50.10 | 60 | With a maximum cross-sectional dimension of 18 mm or more: | | | | |
| 7228.50.10 | 60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | | | |
| 7228.50.50 | 05 | Of high-nickel alloy steel | kg | | | |
| 7228.60 | | Other bars and rods: | | | | |
| 7228.60.10 | | Of tool steel (other than high-speed steel) | | Free | | 29% |
| 7228.60.10 | 30 | Of ball-bearing steel | kg | | | |
| 7228.60.60 | 00 | Not cold-formed | kg | Free | | 28% |
| 7228.60.80 | 00 | Cold-formed | kg | Free | | 28% |
| 7228.70 | | Angles, shapes and sections: | | | | |
| 7228.70.30 | | Hot-rolled, not drilled, not punched and not otherwise advanced | | Free | | 10% |
| 7228.70.30 | 10 | U, I, H and T sections | kg | | | |
| 7228.70.30 | 20 | With a maximum cross-sectional dimension of 76 mm or more: | | | | |
| 7228.70.30 | 20 | Angles | kg | | | |
| 7228.70.30 | 60 | With a maximum cross-sectional dimension of less than 76 mm: | | | | |
| 7228.70.30 | 60 | Angles | kg | | | |
