| 7226.11.90 | 30 | Of thickness not exceeding 0.25 mm | kg | | | |
| 7226.19.90 | 00 | Of a width of less than 300 mm | kg | Free | | 33% |
| 7226.91.25 | | Of a width of less than 300 mm | | Free | | 34% |
| 7226.91.80 | 00 | Of a width of less than 300 mm | kg | Free | | 33% |
| 7226.92.30 | | Of a width of less than 300 mm | | Free | | 34% |
| 7226.92.70 | | Of a thickness not exceeding 0.25 mm | | Free | | 33% |
| 7226.92.80 | | Of a thickness exceeding 0.25 mm | | Free | | 33% |
| 7227.90.10 | | Not tempered, not treated, and not partly manufactured | | Free | | 12% |
| 7228.10.00 | 10 | Not cold-formed | kg | | | |
| 7228.10.00 | 30 | With a maximum cross-sectional dimension of less than 18 mm | kg | | | |
| 7228.20.10 | 00 | Not cold-formed | kg | Free | | 28% |
| 7228.20.50 | 00 | Cold-formed | kg | Free | | 28% |
| 7228.30.40 | 00 | Of chipper knife steel, not cold-formed | kg | Free | | 28% |
| 7228.40.00 | 00 | Other bars and rods, not further worked than forged | kg | Free | | 28% |
| 7228.50.10 | 20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | | | |
| 7228.50.10 | 60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | | | |
| 7228.60.60 | 00 | Not cold-formed | kg | Free | | 28% |
| 7228.60.80 | 00 | Cold-formed | kg | Free | | 28% |
| 7228.70.30 | | Hot-rolled, not drilled, not punched and not otherwise advanced | | Free | | 10% |
| 7229.90.50 | 16 | With a diameter of less than 1.0 mm | kg | | | |
| 7229.90.50 | 31 | With a diameter of 1.0 mm or more but less than 1.5 mm | kg | | | |
| 7303.00.00 | 60 | Pressure pipe with an inside diameter of less than 356 mm | kg | | | |
| 7304.11.00 | 20 | Having an outside diameter not exceeding 114.3 mm | kg | | | |
| 7304.11.00 | 50 | Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm | kg | | | |
| 7304.11.00 | 80 | Having an outside diameter exceeding 406.4 mm | kg | | | |
