| 7405.00 | | Master alloys of copper: | | | | |
| 7405.00.60 | 30 | Beryllium copper master alloy | kg | | | |
| 7410 | | Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm: | | | | |
| 7411.10.10 | 30 | Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools | kg | | | |
| 7415 | | Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper: | | | | |
| 7415.33.80 | 10 | Having shanks, threads or holes 6 mm or more in diameter | kg | | | |
| 7415.33.80 | 50 | Having shanks, threads or holes less than 6 mm in diameter | kg | | | |
| 7419.99.03 | 00 | Fourdrinier wires, seamed or not seamed, suitable for use in paper- making machines, with 94 or more wires to the lineal centimeter | m2 kg | Free | | 75% |
| 7419.99.06 | 60 | Fourdrinier wires, seamed or not seamed, suitable for use in paper- making machines, with fewer than 94 or more wires to the lineal centimeter | m2 kg | | | |
| 7501 | | Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy: | | | | |
| 7501.20.00 | 00 | Nickel oxide sinters and other intermediate products of nickel metallurgy | kg Ni kg | Free | | Free |
| 7601.10.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A+,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.90 | 30 | Aluminum vanadium master alloy | kg | | | |
| 7604.10.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.10.30 | 50 | With an outside diameter of 10 mm or more | kg | | | |
| 7604.29.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.29.30 | 50 | With an outside diameter of 10 mm or more | kg | | | |
| 7607 | | Aluminum foil (whether or not printed, or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm: | | | | |
| 7607.20.10 | 00 | Covered or decorated with a character, design, fancy effect or pattern | kg | 3.7% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 22.5% |
| 7610.90.00 | 20 | Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment | kg | | | |
| 7611.00.00 | | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | | 2.6% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7612 | | Aluminum casks, drums, cans, boxes and similar contain- ers (including rigid or collapsible tubular containers), for any material (otherthan compressed or liquefied gas), of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: | | | | |
| 7612.90.10 | | Of a capacity not exceeding 20 liters | | 5.7% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7612.90.10 | 60 | Cans of a capacity exceeding 355 ml but less than 3.8 liters | No. | | | |
