| 7315.82.50 | 00 | Not over 10 mm in diameter | kg | Free | | 10% |
| 7315.82.70 | 00 | Over 10 mm in diameter | kg | Free | | 10% |
| 7315.89.10 | 00 | Not over 8 mm in diameter | kg | 1.5% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 10% |
| 7315.89.30 | 00 | Over 8 mm in diameter | kg | Free | | 4.7￠/kg |
| 7317.00.55 | 01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | kg | | | |
| 7317.00.55 | 19 | With a length of less than 25.4 mm and with a diameter of less than 1.65 mm | kg | | | |
| 7318.13.00 | 30 | Having shanks or threads with a diameter of less than 6 mm | kg | | | |
| 7318.13.00 | 60 | Having shanks or threads with a diameter of 6 mm or more | kg | | | |
| 7318.14.10 | | Having shanks or threads with a diameter of less than 6 mm | | 6.2% | Free (A+,AU,B,BH, CA,CL,D,E,IL,J, JO,MX,P,SG) 4.1% (MA) | 45% |
| 7318.14.50 | | Having shanks or threads with a diameter of 6 mm or more | | 8.6% | Free (A+,AU,B,BH, CA,CL,D,E,IL,J, JO,MX,P,SG) 5.7% (MA) | 45% |
| 7318.15.20 | 10 | Having shanks or threads with a diameter of less than 6 mm | kg | | | |
| 7318.15.20 | 20 | Having shanks or threads with a diameter of 6 mm or more: | | | | |
| 7318.15.40 | 00 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) | kg | Free | | 2.2￠/kg |
| 7318.15.60 | | Having shanks or threads with a diameter of less than 6 mm | | 6.2% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX,P, SG) | 45% |
| 7318.15.80 | | Having shanks or threads with a diameter of 6 mm or more | | 8.5% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX,P, SG) | 45% |
| 7411.10.10 | 30 | Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools | kg | | | |
| 7415.33.80 | 10 | Having shanks, threads or holes 6 mm or more in diameter | kg | | | |
| 7415.33.80 | 50 | Having shanks, threads or holes less than 6 mm in diameter | kg | | | |
| 7604.10.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.10.30 | 50 | With an outside diameter of 10 mm or more | kg | | | |
| 7604.29.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.29.30 | 50 | With an outside diameter of 10 mm or more | kg | | | |
| 7616.10.70 | | Having shanks, threads or holes over 6 mm in diameter | | 5.5% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 8207.20.00 | 30 | Diamond wire drawing dies | No. kg | | | |
| 8208.10.00 | 30 | Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines | No. | | | |
