| 7604.29.30 | 50 | With an outside diameter of 10 mm or more | kg | | | |
| 7616.10.70 | | Having shanks, threads or holes over 6 mm in diameter | | 5.5% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 8207.20.00 | 30 | Diamond wire drawing dies | No. kg | | | |
| 8208.10.00 | 30 | Over 30.5 cm in length, for metal shearing machines or over 15.2 cm in diameter for metal shearing/slitting machines | No. | | | |
| 8413.70.20 | 05 | With discharge outlet under 5.08 cm in diameter | No. | | | |
| 8413.70.20 | 15 | With discharge outlet 5.08 cm or over in diameter | No. | | | |
| 8413.70.20 | 22 | With discharge outlet under 7.6 cm in diameter | No. | | | |
| 8413.70.20 | 25 | With discharge outlet 7.6 cm or over in diameter | No. | | | |
| 8447.11 | | With cylinder diameter not exceeding 165 mm: | | | | |
| 8447.12 | | With cylinder diameter exceeding 165 mm: | | | | |
| 8471.70.10 | 00 | For a disk of a diameter exceeding 21 cm: | | | | |
| 8482.10.10 | 40 | Bearings having an outside diameter not over 30 mm | No. kg | | | |
| 8482.10.50 | 36 | Other bearings, having an outside diameter of: | | | | |
| 8482.20.00 | 40 | With cups having an outside diameter not exceeding 102 mm | No. kg | | | |
| 8482.20.00 | 70 | For cups having an outside diameter not exceeding 102 mm | No. kg | | | |
| 8483.50.40 | 00 | Gray-iron awning or tackle pulleys, not over 6.4 cm in wheel diameter | X | 5.7% | Free (A,AU,BH,C, CA,CL,E,IL,J,JO, MA,MX,P,SG) | 45% |
| 8518.10.40 | 00 | Microphones having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 10 mm and a height not exceeding 3 mm, for telecommunication use | No. | Free | | 35% |
| 8518.29.40 | 00 | Without housing, having a frequency range of 300 Hz to 3.4 kHz with a diameter of not exceeding 50 mm, for telecommunication use | No. | Free | | 35% |
| 8532.22.00 | 20 | Not exceeding 18 mm in diameter | No. | | | |
| 8532.22.00 | 40 | Exceeding 18 mm but not exceeding 35 mm in diameter | No. | | | |
| 8532.22.00 | 55 | Exceeding 35 mm but not exceeding 51 mm in diameter | No. | | | |
| 8532.22.00 | 85 | Exceeding 51 mm in diameter | No. | | | |
| 8539.29.20 | 00 | Lamps having glass envelopes not over 6.35 mm in maximum diameter and suitable for use in cystoscopes and other surgical instruments | No. | 5.2% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX,P,SG) | 55% |
| 8544.11.00 | 20 | 33 AWG (0.18 mm in diameter) and finer | kg | | | |
| 8544.11.00 | 30 | 22 AWG (0.643 mm in diameter) and finer but larger than 33 AWG (0.18 mm in diameter) | kg | | | |
