| 2516.90.00 | 30 | Having a thickness of 7.5 cm or more | t | | | |
| 2517 | | Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling, or for railway or other ballast; shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading 2515 or 2516, whether or not heat-treated: | | | | |
| 2517.20.00 | 00 | Macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in subheading 2517.10 | t | Free | | 30% |
| 2517.41.00 | 00 | Granules, chippings and powder, of stones of heading 2515 or 2516, whether or not heat-treated: | | | | |
| 2524.90.00 | 45 | Milled fibers, group 4 and 5 grades | t | | | |
| 2602.00.00 | 40 | Containing less than 47 percent by weight of manganese | kg Mn kg | | | |
| 2602.00.00 | 60 | Containing 47 percent or more by weight of manganese | kg Mn kg | | | |
| 2610.00.00 | 20 | Having a chromium content equivalent to not more than 40 percent chromic oxide (Cr2O3) | t Cr2O3 t | | | |
| 2610.00.00 | 40 | Having a chromium content equivalent to more than 40 percent but less than 46 percent chromic oxide (Cr2O3) | t Cr2O3 t | | | |
| 2610.00.00 | 60 | Having a chromium content equivalent to 46 percent or more chromic oxide (Cr2O3) | t Cr2O3 t | | | |
| 2620.99.30 | 00 | Materials not provided for elsewhere in this heading containing by weight over 10 percent nickel | kg Ni kg | Free | | Free |
| 2620.99.50 | 00 | Slag containing by weight over 40 percent titanium, and which if containing over 2 percent by weight of copper, lead, or zinc is not to be treated for the recovery thereof | kg | Free | | Free |
| 2704.00.00 | 11 | Coke larger than 100 mm (4 inches) in maximum diameter and at least 50 percent of which is retained on a 100-mm (4-inch) sieve after drop shatter testing pursuant to ASTM D 3038, of a kind used in foundries | t | | | |
| 2709.00.10 | 00 | Testing under 25 degrees A.P.I | bbl | 5.25￠/bbl | Free (A+,AU,CA, BH,CL,D,IL,J+,JO, MX,P,R,SG) 3.4￠/bbl (MA) | 21￠/bbl |
| 2709.00.20 | | Testing 25 degrees A.P.I. or more | | 10.5￠/bbl | Free (A+,AU,BH, CA,CL,D,IL,J+,JO, MX,P,R,SG) 6.9￠/bbl (MA) | 21￠/bbl |
| 2710.19.05 | | Testing under 25 degrees A.P.I | | 5.25￠/bbl | Free (A+,AU,BH, CA,CL,D,IL,J+,JO, MA,MX,P, R,SG) | 21￠/bbl |
| 2710.19.05 | 05 | Having a Saybolt Universal viscosity at 37.8 degrees C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): | | | | |
| 2710.19.05 | 25 | Having a Saybolt Universal viscosity at 37.8 degrees C of more than 125 seconds (heavy fuel oils): | | | | |
| 2710.19.05 | 25 | Fuel oil No. 5 | bbl | | | |
| 2710.19.05 | 30 | Fuel oil No. 6 | bbl | | | |
| 2710.19.10 | | Testing 25 degrees A.P.I. or more | | 10.5￠/bbl | Free (A+,AU,BH, CA,CL,D,IL,J+,JO, MX,P,R,SG) 6.9￠/bbl (MA) | 21￠/bbl |
| 2710.19.10 | 11 | Containing not more than 15 ppm of sulfur | bbl | | | |
| 2710.19.10 | 13 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | | | |
| 2710.19.10 | 15 | Having a Saybolt Universal viscosity at 37.8 degrees C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): | | | | |
| 2710.19.10 | 50 | Having a Saybolt Universal viscosity at 37.8 degrees C of more than 125 seconds (heavy fuel oils) | bbl | | | |
