| 7404.00.30 | | Spent anodes; waste and scrap with a copper content of less than 94 percent by weight | | Free | | 6% |
| 7408.11.30 | 00 | With a maximum cross-sectional dimension over 9.5 mm | kg | 1% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 7% |
| 7408.11.60 | 00 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | kg | 3% | Free (A*,AU,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 28% |
| 7409.11.50 | | Of a thickness of less than 5 mm | | 1% | Free (A*,AU,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 7.5% |
| 7409.11.50 | 50 | Of a width of less than 500 mm | kg | | | |
| 7409.21.00 | 75 | Of a thickness less than 1.6 mm | kg | | | |
| 7409.29.00 | 75 | Of a thickness less than 1.6 mm | kg | | | |
| 7409.31.90 | 00 | Of a width of less than 500 mm | kg | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 49% |
| 7409.39.90 | | Of a width of less than 500 mm | | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 49% |
| 7409.90.90 | | Of a width of less than 500 mm | | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 49% |
| 7601.20.90 | 75 | Remelt scrap ingot | kg | | | |
| 7604.10.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.10.50 | 30 | With a maximum cross-sectional dimension of less than 10 mm | kg | | | |
| 7604.29.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.29.50 | 30 | With a maximum cross-sectional dimension of less than 10 mm | kg | | | |
| 7605.11.00 | | Of which the maximum cross-sectional dimension exceeds 7 mm | | 2.6% | Free (A*,AU,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 11% |
| 7605.11.00 | 30 | Of which the maximum cross-sectional dimension exceeds 9.5 mm | kg | | | |
| 7605.21.00 | | Of which the maximum cross-sectional dimension exceeds 7 mm | | 2.6% | Free (A*,AU,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 11% |
| 7605.21.00 | 30 | Of which the maximum cross-sectional dimension exceeds 9.5 mm | kg | | | |
| 7606.11.30 | 30 | With a thickness of more than 6.3 mm | kg | | | |
| 7606.12.30 | 30 | With a thickness of more than 6.3 mm | kg | | | |
| 7607.11.30 | 00 | Of a thickness not exceeding 0.01 mm | kg | 5.8% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 40% |
| 7607.11.60 | 00 | Of a thickness exceeding 0.01 mm | kg | 5.3% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 40% |
| 7607.19.30 | 00 | Cut to shape, of a thickness not exceeding 0.15 mm | kg | 5.7% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7610.90.00 | 20 | Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment | kg | | | |
