| 7307.22 | | Threaded elbows, bends and sleeves: | | | | |
| 7307.22.10 | 00 | Sleeves (couplings) | kg | Free | | 45% |
| 7307.91.50 | 10 | With an inside diameter of less than 360 mm: | | | | |
| 7307.91.50 | 50 | With an inside diameter of 360 mm or more: | | | | |
| 7307.92 | | Threaded elbows, bends and sleeves: | | | | |
| 7307.92.30 | | Sleeves (couplings) | | Free | | 45% |
| 7307.93.30 | | With an inside diameter of less than 360 mm: | | | | |
| 7307.93.90 | | With an inside diameter of 360 mm or more | | 4.3% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7308 | | Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge sections, lock gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns) of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: | | | | |
| 7309.00.00 | | Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | | Free | | 45% |
| 7310 | | Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment: | | | | |
| 7310.21.00 | 25 | Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods | No. | | | |
| 7310.29.00 | 25 | Containers, of circular cross section, of a volume capacity between 11.4 liters and 26.6 liters, of a kind used for the conveyance of goods | No. | | | |
| 7311.00.00 | 30 | Certified prior to exportation to have been made in accordance with the safety requirements of sections 178.36 through 178.68 of title 49 CFR or under a specific exemption to those requirements: | | | | |
| 7311.00.00 | 30 | Seamless steel containers not overwrapped, marked DOT 3A, 3AX, 3AA, 3AAX, 3B, 3E, 3HT, 3T or DOT-E followed by a specific exemption number | No. kg | | | |
| 7312.10.10 | 50 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7312.10.30 | 70 | Covered with textile or other nonmetallic material | kg | | | |
| 7312.10.30 | 10 | Covered with textile or other non- metallic material | kg | | | |
| 7312.10.30 | 20 | Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5 | kg | | | |
| 7312.10.30 | 65 | Galvanized: | | | | |
| 7312.10.90 | 30 | Galvanized: | | | | |
| 7314.12 | | Woven cloth: | | | | |
| 7314.12.10 | 00 | With meshes not finer than 12 wires to the lineal centimeter in warp or filling | m2 kg | Free | | 35% |
| 7314.12.20 | 00 | With meshes finer than 12 but not finer than 36 wires to the lineal centimeter in warp or filling | m2 kg | Free | | 50% |
| 7314.12.30 | 00 | With meshes finer than 36 wires to the lineal centimeter in warp or filling: | | | | |
