| 7415.33.80 | | Other screws and bolts; nuts | | 3% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7418.19.10 | 00 | Coated or plated with precious metals | kg | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 50% |
| 7419.99.16 | 00 | Copper springs | kg | 3% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7501.10.00 | 00 | Nickel mattes | kg Ni kg | Free | | Free |
| 7502.20.00 | 00 | Nickel alloys | kg | Free | | 6.6￠/kg |
| 7504.00.00 | | Nickel powders and flakes | | Free | | 6.6￠/kg |
| 7504.00.00 | 10 | Powders | kg | | | |
| 7504.00.00 | 50 | Flakes | kg | | | |
| 7505.11.50 | 00 | Profiles | kg | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7505.12.50 | 00 | Profiles | kg | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO,MA, MX,P,SG) | 45% |
| 7506.10.05 | 00 | Not exceeding 0.15 mm in thickness | kg | 2.5% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7506.20.05 | 00 | Not exceeding 0.15 mm in thickness | kg | 3% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7507.12.00 | 00 | Of nickel alloys | kg | 2% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 35% |
| 7507.20.00 | 00 | Tube or pipe fittings | kg | 3% | Free (A,AU,B,BH, CA,CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7601.10.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A+,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.30 | 00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% | Free (A,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.9% (CL) | 18.5% |
| 7601.20.90 | 75 | Remelt scrap ingot | kg | | | |
| 7601.20.90 | 45 | Of uniform circular cross section throughout its length, not in coils | kg | | | |
| 7603.20.00 | 00 | Powders of lamellar structure; flakes | kg | 3.9% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 11% |
| 7604.10.10 | 00 | Profiles | kg | 5% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7604.10.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
| 7604.10.50 | 30 | With a maximum cross-sectional dimension of less than 10 mm | kg | | | |
| 7604.29 | 00 | Hollow profiles | kg | 1.5% | Free (A,AU,BH, CA,D,E,IL,J,JO, MA,MX, P,SG) 0.5% (CL) | 15.5% |
| 7604.29.10 | 00 | Other profiles | kg | 5% | Free (A,AU,BH,CA, CL,E,IL,J,JO, MA,MX, P,SG) | 45% |
| 7604.29.30 | 10 | With an outside diameter of less than 10 mm | kg | | | |
