| 7216.33.00 | 13 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 355 mm but not exceeding 635 mm | KGM | | |
| 7216.33.00 | 14 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Wide flange: - Of a height exceeding 635 mm | KGM | | |
| 7216.33.00 | 20 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Bearing pile | KGM | | |
| 7216.33.00 | 91 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | | |
| 7216.33.00 | 92 | Angles, shapes and sections of iron or non-alloy steel. - U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more: - H sections - Other: - Of a height exceeding 152.4 mm | KGM | | |
| 7216.40.00 | | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | KGM | Free | CCCT, LDCT |
| 7216.40.00 | 11 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height of 80 mm or more but not exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 12 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, equal legs: - Of a height exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 21 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height of 80 mm or more but not exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 22 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - L sections, unequal legs: - Large leg, of a height exceeding 152.4 mm | KGM | | |
| 7216.40.00 | 30 | Angles, shapes and sections of iron or non-alloy steel. - L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more - T sections | KGM | | |
| 7225.40.00 | 92 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other: - Of a width exceeding 1,525 mm but not exceeding 1,830 mm | KGM | | |
| 7225.40.00 | 93 | Flat-rolled products of other alloy steel, of a width of 600 mm or more. - Other, not further worked than hot-rolled, not in coils - Other: - Of a width exceeding 1,830 mm but not exceeding 2,450 mm | KGM | | |
| 7304.29.00 | 11 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification | KGM | | |
| 7304.29.00 | 19 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 114.3 mm but not exceeding 177.8 mm: - Other | KGM | | |
| 7304.29.00 | 21 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 177.8 mm but not exceeding 298.5 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification | KGM | | |
| 7304.29.00 | 29 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 177.8 mm but not exceeding 298.5 mm: - Other | KGM | | |
| 7304.29.00 | 31 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 298.5 mm: - Of an A.P.I. grade H-40, J-55, K-55 or equivalent proprietary specification | KGM | | |
| 7304.29.00 | 39 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Casing, tubing and drill pipe, of a kind used in drilling for oil or gas: - Other - Casing, of an external diameter exceeding 298.5 mm: - Other | KGM | | |
| 7304.39.00 | 10 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel. - Other, of circular cross-section, of iron or non-alloy steel: - Other - For blast furnaces for smelting iron ore; For use in the manufacture of cylinders for calendering, supercalendering or embossing paper or textiles; For use in the manufacture of drill pipe, casing or tubing, or fittings, couplings, thread protectors or nipples therefor, for natural gas or oil wells; For use in the manufacture of separators or treaters (water, oil, gas), for installation between the wellhead assembly or surface oil pumping unit and the field marketing valve at oil or natural gas wells; Tubes and pipes, centrifugally cast, with plain ends, having a wall thickness of 15.875 mm or more but not exceeding 63.5 mm, for use in the manufacture of rolls for paper-making machinery | KGM | | |
| 8207.70.00 | 11 | Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring tools. - Tools for milling - Milling cutters: - Tungsten carbide tipped | NMB | | |
| 8207.70.00 | 19 | Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring tools. - Tools for milling - Milling cutters: - Other | NMB | | |
| 8207.70.00 | 90 | Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring tools. - Tools for milling - Other | - | | |
| 8207.80.00 | | Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring tools. - Tools for turning | NMB | Free | CCCT, LDCT |
| 8207.80.00 | 10 | Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring tools. - Tools for turning - Tungsten carbide tipped | NMB | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
