| 8419.20.00 | 20 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Medical, surgical or laboratory sterilizers - Laboratory sterilizers | NMB | Free | CCCT, LDCT |
| 8419.31.00 | 00 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Dryers: - For agricultural products | NMB | Free | CCCT, LDCT |
| 7326.90.10 | 60 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells | - | | |
| 8419.20.00 | | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Medical, surgical or laboratory sterilizers | NMB | Free | CCCT, LDCT |
| 8419.20.00 | 10 | Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading 85.14), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilizing, pasteurizing, steaming, drying, evaporating, vaporizing, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric.
- Medical, surgical or laboratory sterilizers - Medical or surgical sterilizers | NMB | Free | CCCT, LDCT |
| 7326.90.10 | 70 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks | - | | |
| 7326.90.10 | 80 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Tracks, for use in the manufacture of skid steer loaders | - | | |
| 8309.90.00 | 10 | Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal. - Other - Aluminum can lids, to be employed in packaging beverage products in drawn aluminum cans; Aluminum can lids, with an easy-open feature, for use in the manufacture of food cans; Roll-on pilfer proof aluminum closures, 30 mm diameter x 35 mm deep and 35 mm diameter x 32 mm deep, to be employed in packaging beverage products in bottles; Steel can lids, having a full panel easy-open feature, for use in the manufacture of food cans; Steel covers, for use in the manufacture of tops and bottoms of welded aerosol containers | - | | |
| 7326.90.10 | 90 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Other | - | | |
| 74.12 | | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). | | | |
| 7412.10.00 | | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper | KGM | Free | CCCT, LDCT |
| 7412.10.00 | 11 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper - Pressure type: - Wrought | KGM | | |
| 7412.10.00 | 19 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper - Pressure type: - Other | KGM | | |
| 7412.10.00 | 90 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of refined copper - Other | KGM | | |
| 7412.20.00 | | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys | KGM | Free | CCCT, LDCT |
| 7412.20.00 | 11 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Pressure type: - Forged | KGM | | |
| 7412.20.00 | 12 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Pressure type: - Cast | KGM | | |
| 7412.20.00 | 19 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Pressure type: - Other | KGM | | |
| 7412.20.00 | 90 | Copper tube or pipe fittings (for example, couplings, elbows, sleeves). - Of copper alloys - Other | KGM | | |
| 75.07 | | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). | | | |
| 7507.11.00 | 00 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel, not alloyed | KGM | Free | CCCT, LDCT |
| 7507.12.00 | | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel alloys | KGM | Free | CCCT, LDCT |
| 7507.12.00 | 12 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel alloys - Seamless, unworked, containing by weight 60% or more of nickel: - Nickel-copper alloys | KGM | | |
| 7507.12.00 | 13 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel alloys - Seamless, unworked, containing by weight 60% or more of nickel: - Nickel-chromium-iron alloys | KGM | | |
| 7507.12.00 | 19 | Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel alloys - Seamless, unworked, containing by weight 60% or more of nickel: - Other | KGM | | |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
