Home|Add to Favorites|Add to My Toolkit
International Trade|Register|Sign in|Customization
  1/50         
Sharing buttons for facebookSharing buttons for twitterSharing buttons for Google plus
HS Code and Harmonized Tariff Schedule of Canada
HS NoSS Description of Goods Unit of Meas.  MFN Tariff Applicable Preferential Tariffs
3603.00.0010Safety fuses; detonating fuses; percussion or detonating caps; igniters; electric detonators. - Safety fuses or detonating fuses-  
3603.00.0040Safety fuses; detonating fuses; percussion or detonating caps; igniters; electric detonators. - Igniters or electric detonators-  
3603.00.0050Safety fuses; detonating fuses; percussion or detonating caps; igniters; electric detonators. - Percussion or detonating caps-  
2716.00.0000Electrical energy.MWHFreeCCCT, LDCT
3603.00.00 Safety fuses; detonating fuses; percussion or detonating caps; igniters; electric detonators.-6.5%CCCT, LDCT
3818.00.00 Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics.KGMFreeCCCT, LDCT
3925.90.0011Builders' ware of plastics, not elsewhere specified or included. - Other - Fittings and mountings of Chapter Note 11 (ij): - Electrical protective plates-6.5%CCCT, LDCT
3004.90.0076Medicaments (excluding goods of heading 30.02, 30.05 or 30.06) consisting of mixed or unmixed products for therapeutic or prophylactic uses, put up in measured doses (including those in the form of transdermal administration systems) or in forms or packings for retail sale. - Other - Other, for human use: - Primarily affecting electrolytic, caloric or water balance-  
3214.10.1000Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like. - Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings - Containing phenol-formaldehyde resin, for use in the manufacture of filament lamps; Polyester or epoxide-based mastic, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generatorsKGMFreeCCCT, LDCT
6301.40.00 Blankets and travelling rugs. - Blankets (other than electric blankets) and travelling rugs, of synthetic fibresKGM17%LDCT, UST,
3801.30.0000Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures. - Carbonaceous pastes for electrodes and similar pastes for furnace liningsKGMFreeCCCT, LDCT
3818.00.0010Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics. - ElementsKGMFreeCCCT, LDCT
3818.00.0020Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics. - CompoundsKGMFreeCCCT, LDCT
38.10 Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods.   
3810.10.0000Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods. - Pickling preparations for metal surfaces; soldering, brazing or welding powders and pastes consisting of metal and other materialsKGMFreeCCCT, LDCT
3810.90.00 Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods. - OtherKGMFreeCCCT, LDCT
3810.90.0011Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods. - Other - Fluxes and other auxiliary preparations for soldering, brazing or welding: - Submerged arc flux for arc weldingKGMFreeCCCT, LDCT
3810.90.0019Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods. - Other - Fluxes and other auxiliary preparations for soldering, brazing or welding: - OtherKGMFreeCCCT, LDCT
3810.90.0020Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods. - Other - Preparations of a kind used as cores or coatings for welding electrodes or rodsKGMFreeCCCT, LDCT
3911.90.0010Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms. - Other - To be employed in removing salts or water from crude petroleum oils; Hydrocarbon resins, excluding compositions and hydrocarbon resins with a number average molecular weight of less than 2,000, a mixed aniline point between 30°C and 60°C and a ring and ball softening point of less than 130°C as determined by ASTM E 28; Paratertiobutyl phenol disulfide polymer, for use in the manufacture of rubber pneumatic tires; Resin hardener, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generatorsKGMFreeCCCT, LDCT
3919.10.9100Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls. - In rolls of a width not exceeding 20 cm - Other: - Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05 or 39.06;Of polymers of heading 39.07, excluding of epoxide resins, of unsaturated polyesters, or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose or of vulcanized fibre;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Polyester or polystyrene film, of a thickness not exceeding 0.25 mm, for use in the manufacture of loud-speakers or audio-frequency electric amplifiers, record-players or magnetic tape transcribing machines, magnetic tape sound recording apparatus, tape transport mechanisms, electrical equipment of heading 85.21, 85.25, 85.26, 85.27 or 85.28, and parts of the foregoing, including transformers and inductors;Strips of polyurethane for use in the manufacture of clothingKGMFreeCCCT, LDCT
3921.90.9100Other plates, sheets, film, foil and strip, of plastics. - Other - Other: - Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05;Of polymers of heading 39.06, excluding of polymers of methyl methacrylate;Of polymers of heading 39.07, excluding of epoxide resins or of unsaturated polyesters, or poly(ethylene terephthalate) film of a width of less than 15 cm or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose, of vulcanized fibre or cellulose acetate and cellulose acetate butyrate sheets, film or strip, of a thickness exceeding 0.08 mm or of a width less than 15 cm and a thickness not exceeding 0.08 mm;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Sheeting of glass fibre reinforced epoxide resin, whether or not in the form of ripple springs, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generators;Sheets, consisting of plain, coloured or decorated paper, coated or impregnated with melamine-formaldehyde resins, to be used as decorative surface coverings for particleboard, fibreboard or similar panel board products for the manufacture of furniture;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission beltsKGMFreeCCCT, LDCT
3926.90.9950Other articles of plastics and articles of other materials of headings 39.01 to 39.14. - Other - Other: - Other - Electrical wiring accessories, non-current carrying-6.5%CCCT, LDCT
4403.10.0011Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared. - Treated with paint, stains, creosote or other preservatives - Poles for telephone, telegraph or electrical lines: - Of a length not exceeding 11 metresMTRFreeCCCT, LDCT
4403.10.0012Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared. - Treated with paint, stains, creosote or other preservatives - Poles for telephone, telegraph or electrical lines: - Of a length exceeding 11 metresMTRFreeCCCT, LDCT
 1/50          




Top Use:    Harmonized Tariff Schedule of the Canada inquiry:  aircraft+parts

Recent user inquiry:



I want to Post a new feedback