| 7326.90.10 | 60 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Vacuum evaporator masks, of stainless steel, having a 90% front etch and a 10% back etch, for the production of photo cells | - | | |
| 7326.90.10 | 70 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Semi-elliptical heads, of an external diameter of either 609.6 mm or
762 mm, to specification ASTM A455, for use in air compressor tanks | - | | |
| 7326.90.10 | 80 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Tracks, for use in the manufacture of skid steer loaders | - | | |
| 7326.90.10 | 90 | Other articles of iron or steel. - Other - Couplings for sucker rods, pony rods or polished rods for oilfield related pumps;Fishing tools and parts thereof to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or for drilling machinery employed in the exploration, discovery, development or operation of potash or rock salt deposits;For climbing or mountaineering;For keeping nets open and swivels, to be employed in commercial fishing or in the commercial harvesting of marine plants;For use in the manufacture of detectors for propane or other toxic fumes;For use in the manufacture of fire fighting vehicles;For use in the manufacture of goods of Section XVI or of Chapter 73, such goods being used in the recovery or production of crude oil from shales, oil-sands or tar-sands;For use in the manufacture or repair of engines or parts thereof for commercial fishing vessels;Forged steel clevis hooks and eye hooks for use in the manufacture of debris chutes;Identification bands for migratory birds;Pitless well heads and parts thereof;Reusable containers, specially designed to be employed in the transportation of motor vehicle components which are free of customs duties, presented with the goods therein;Seat post clamps and cable hangers for use in the manufacture of unicycles, bicycles or tricycles;Semi-elliptical heads, of an external diameter of either 609.6 mm or 762 mm, to specification ASTM A455, for use in air compressor tanks;Snap hooks of forged steel, zinc plated, 12.5 cm to 23 cm in length, for use in the manufacture of debris chutes and chute hoists;Steel stanchions for confining livestock either in pens or individually;The following to be employed in the exploration, discovery, development, maintenance, testing, depletion or production of oil or natural gas wells or potash or rock salt deposits:Flanged casing heads;Screwed casing heads for surface casings of an external diameter exceeding 273 mm, or rated for service in working pressures exceeding 14 MPa W.O.G. (water, oil, gas);Well packers and parts thereof;To be employed in the processing, storing or insemination of animal semen;Tracks for use in the manufacture of skid steer loaders;Vacuum evaporator masks, of stainless steel, having a 90% front etch and 10% back etch, for the production of photo cells;Wick sustainers for use in the manufacture of candles
- Other | - | | |
| 7419.99.90 | 40 | Other articles of copper. - Other: - Other - Other - Brass plumbing goods, not elsewhere specified or included | KGM | | |
| 8415.90.11 | 00 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Parts - Of the goods of tariff item No. 8415.10.00, 8415.20.10, 8415.81.90, 8415.82.10, 8415.82.99 or 8415.83.90: - Chassis, chassis bases or outer cabinets | - | Free | CCCT, LDCT |
| 8415.90.19 | 00 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Parts - Of the goods of tariff item No. 8415.10.00, 8415.20.10, 8415.81.90, 8415.82.10, 8415.82.99 or 8415.83.90: - Other | - | Free | CCCT, LDCT |
| 8415.90.21 | 00 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Parts - Of the goods of tariff item No. 8415.20.90, 8415.81.10, 8415.82.91 or 8415.83.10: - Chassis, chassis bases or outer cabinets for use in the manufacture of the goods of these tariff items | - | Free | CCCT, LDCT |
| 8415.90.22 | 00 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Parts - Of the goods of tariff item No. 8415.20.90, 8415.81.10, 8415.82.91 or 8415.83.10: - Other chassis, chassis bases or outer cabinets | - | Free | AUT, NZT, |
| 8415.90.23 | 00 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Parts - Of the goods of tariff item No. 8415.20.90, 8415.81.10, 8415.82.91 or 8415.83.10: - Other parts for use in the manufacture of the goods of these tariff items | - | Free | CCCT, LDCT |
| 8415.90.29 | 00 | Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated. - Parts - Of the goods of tariff item No. 8415.20.90, 8415.81.10, 8415.82.91 or 8415.83.10: - Other | - | Free | AUT, NZT, |
| 83.08 | | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. | | | |
| 8308.10.00 | 00 | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. - Hooks, eyes and eyelets | KGM | Free | CCCT, LDCT |
| 8308.20.00 | 00 | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. - Tubular or bifurcated rivets | - | Free | CCCT, LDCT |
| 8308.90.00 | | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. - Other, including parts | - | Free | CCCT, LDCT |
| 8308.90.00 | 10 | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. - Other, including parts - Buckles and parts thereof, for use in the manufacture of footwear, footwear fittings or belts; Clasps, frames with clasps, buckles, buckle-clasps, for climbing or mountaineering; Frames with clasps, clasps, buckles, buckle-clasps and the like, parts of all the foregoing, parts of hooks, eyes, eyelets and the like, for use in the manufacture of handbags or purses | - | | |
| 8308.90.00 | 20 | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. - Other, including parts - Other buckles | - | | |
| 8308.90.00 | 90 | Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal. - Other, including parts - Other | - | | |
| 8406.90.21 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.10.00: - Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery | - | Free | CCCT, LDCT |
| 8406.90.22 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.10.00: - Rotors, finished for final assembly | - | Free | CCCT, LDCT |
| 8406.90.23 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.10.00: - Blades, rotating or stationary | - | Free | CCCT, LDCT |
| 8406.90.29 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.10.00: - Other | - | Free | CCCT, LDCT |
| 8406.90.31 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.81.00 or 8406.82.00: - Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof | - | Free | CCCT, LDCT |
| 8406.90.32 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.81.00 or 8406.82.00: - Other rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues or risers, or to permit location in finishing machinery | - | Free | CCCT, LDCT |
| 8406.90.33 | 00 | Steam turbines and other vapour turbines. - Parts - Other parts of the goods of tariff item No. 8406.81.00 or 8406.82.00: - Rotors, finished for final assembly, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof | - | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: aircraft+parts
