| 4408.90.90 | 16 | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. - Other - Other - Cherry, oak, walnut, birch, maple or elm, not reinforced or backed: - Maple | MTK | Free | CCCT, LDCT |
| 4408.90.90 | 17 | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. - Other - Other - Cherry, oak, walnut, birch, maple or elm, not reinforced or backed: - Elm | MTK | Free | CCCT, LDCT |
| 4408.90.90 | 21 | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. - Other - Other - Other, not reinforced or backed: - Ash | MTK | Free | CCCT, LDCT |
| 4408.90.90 | 29 | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. - Other - Other - Other, not reinforced or backed: - Other | MTK | Free | CCCT, LDCT |
| 4408.90.90 | 30 | Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6 mm. - Other - Other - Reinforced or backed | MTK | Free | CCCT, LDCT |
| 7226.20.00 | 00 | Flat-rolled products of other alloy steel, of a width of less than 600 mm. - Of high speed steel | KGM | Free | CCCT, LDCT |
| 7227.10.00 | 00 | Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel. - Of high speed steel | KGM | Free | AUT, NZT, |
| 7228.10.00 | 00 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel. - Bars and rods, of high speed steel | KGM | Free | AUT, NZT, |
| 7326.19.90 | 22 | Other articles of iron or steel. - Forged or stamped, but not further worked: - Other - Other - Other forgings: - Of high speed steel | KGM | | |
| 7607.19.00 | 10 | Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm. - Not backed: - Other - Epoxy coated, for use in the manufacture of peelable, retortable lids, for food containers; Etched, for use in the manufacture of electrolytic capacitors; In rolls, for use in the manufacture of smooth wall containers of subheading 7612.90; One side bright and one side matte, "A wettable", of a thickness of 18 microns or more but not exceeding 61 microns, in rolls having a width of 1.225 mm or more but not exceeding 1.520 mm, for use in the manufacture of lidding stock and pouch stock | KGM | Free | CCCT, LDCT |
| 8406.90.10 | 00 | Steam turbines and other vapour turbines. - Parts - Blade diaphragms, spindle discs and shafts, wholly or in chief part of metal, for the repair or remanufacture of steam turbines or parts thereof;
Electro-mechanical speed regulators and parts thereof, for steam turbines | - | Free | CCCT, LDCT |
| 8410.90.10 | 00 | Hydraulic turbines, water wheels, and regulators therefor. - Parts, including regulators - Electro-mechanical speed regulators, and parts thereof, for hydraulic turbines;
Stay rings, turbine shafts, runner parts, bottom rings, wicket gates and head covers, for use in the manufacture of hydraulic turbines of a power exceeding 100 MW | - | Free | CCCT, LDCT |
| 8413.70.10 | | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries | NMB | Free | CCCT, LDCT |
| 8413.70.10 | 10 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Milk pumps: - Milk pumps | NMB | Free | CCCT, LDCT |
| 8413.70.10 | 21 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Multi-stage single suction pumps with head over 5,516 kPa: - To be employed in the exploration, discovery, development, maintenance, testing, depletion or production of water, oil or natural gas wells, in mining or quarrying, or in the distillation or recovery of products from natural gas | NMB | Free | CCCT, LDCT |
| 8413.70.10 | 29 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Multi-stage single suction pumps with head over 5,516 kPa: - Other | NMB | Free | CCCT, LDCT |
| 8413.70.10 | 90 | Pumps for liquids, whether or not fitted with a measuring device; liquid elevators. - Other centrifugal pumps - Battery operated, for recreational vehicles and boats;
Canned rotor;
De-foaming type;
Drinking fountain;
For food, pharmaceutical or similar applications;
For swimming pools;
Heat transfer, oil type;
Magnetic drive chemical;
Milk;
Molten metal;
Multi-stage single suction, with head over 5,516 kPa;
Of a power not exceeding 250 kW, for pulp manufacturing;
Portable, engine type, capable of producing a minimum pressure boost of 1,034 kPa, maintaining a flow rate exceeding 700 l/m at that pressure;
Solar powered;
Submersible slurry, agitator type;
Transformer oil circulation pumps;
Vertical slurry, of cantilever shaft design, having a pump discharge flange size of a diameter of 50.8 cm or more, for track-laying machines to be employed in mining, recovering and producing crude oil from shales, oil-sands or tar-sands;
With speed variators, for the wine and juice making industries - Other | NMB | Free | CCCT, LDCT |
| 8414.51.10 | 00 | Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters. - Fans: - Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125 W - Personal fans, mains powered;Table fans, single or variable speed, oscillating | NMB | 8% | CCCT, LDCT |
| 8504.40.40 | 00 | Electrical transformers, static converters (for example, rectifiers) and inductors. - Static converters - Speed drive controllers for electric motors | - | Free | CCCT, LDCT |
| 8462.99.11 | 00 | Machine-tools (including presses) for working metal by forging, hammering or die-stamping; machine-tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above. - Other: - Other - Numerically controlled: - Bangle rounding and sizing machines (jewellery industry);
Can flatteners with magnetic separators;
Combined stamping and bending machines for metal hose clamps;
Dressing machines for facing diamond and carbide segments in stone cutting saws;
Edgers and scale brakers;
Fine blanking presses with mechanical ram drive;
High speed production presses capable of operating at more than 600 strokes per minute;
Horizontal Venetian blind manufacturing machinery;
Horn presses;
Multilayer vacuum press systems for printed circuit board production;
Powder metal presses;
Punch press and plastic cone tie maker systems;
Terminal lead wire attaching, crimping or clinching presses or machines;
Welding presses | NMB | Free | CCCT, LDCT |
| 84.83 | | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). | | | |
| 8483.10.00 | | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks | - | Free | CCCT, LDCT |
| 8483.10.00 | 11 | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks - Transmission shafts, excluding cam shafts and main shafts or driving shafts, for use with the tractors of heading 87.01 powered by an internal combustion engine, excluding road tractors for semi-trailers and log skidders: - Crank-shafts | - | Free | CCCT, LDCT |
| 8483.10.00 | 19 | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks - Transmission shafts, excluding cam shafts and main shafts or driving shafts, for use with the tractors of heading 87.01 powered by an internal combustion engine, excluding road tractors for semi-trailers and log skidders: - Other | - | Free | CCCT, LDCT |
| 8483.10.00 | 91 | Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints). - Transmission shafts (including cam shafts and crank shafts) and cranks - Other: - Cam shafts and crank shafts, designed for use solely or principally with spark-ignition internal combustion piston engines or rotary engines of vehicles of Chapter 87 | - | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: Vaccum
