| 3824.90.00 | 79 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. - Other - Fatty acids, dimerized, trimerized, esterified or epoxidized; Corrosion inhibitors; Molecular sieves; Heat transfer fluids; Lithographic preparations; Collecting agents for ores, metals or other minerals; Odoriferous preparations of a kind used as leak detectors: - Other | KGM | Free | CCCT, LDCT |
| 3824.90.00 | 80 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. - Other - Other mixed preparations | KGM | Free | CCCT, LDCT |
| 3824.90.00 | 90 | Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included. - Other - Other | KGM | Free | CCCT, LDCT |
| 38.25 | | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. | | | |
| 3825.10.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Municipal waste | KGM | 6.5% | CCCT, LDCT |
| 3825.20.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Sewage sludge | KGM | 6.5% | CCCT, LDCT |
| 3825.30 | | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Clinical waste | | | |
| 3825.30.10 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Clinical waste - Soiled dressings (wadding, gauze, bandages and similar articles) contaminated as a result of medical, surgical, dental or veterinary procedures;Syringes, needles, catheters, cannulae and the like | - | Free | CCCT, LDCT |
| 3825.30.20 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Clinical waste - Surgical gloves of vulcanized rubber other than hard rubber | PAR | 15.5% | CCCT, LDCT |
| 3825.30.90 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Clinical waste - Other | KGM | 6.5% | CCCT, LDCT |
| 3825.41.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Waste organic solvents: - Halogenated | KGM | 6.5% | CCCT, LDCT |
| 3825.49.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Waste organic solvents: - Other | KGM | 6.5% | CCCT, LDCT |
| 3825.50.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Wastes of metal pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids | KGM | 6.5% | CCCT, LDCT |
| 3825.61.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Other wastes from chemical or allied industries: - Mainly containing organic constituents | KGM | 6.5% | CCCT, LDCT |
| 3825.69.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Other wastes from chemical or allied industries: - Other | KGM | 6.5% | CCCT, LDCT |
| 3825.90.00 | 00 | Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in Note 6 to this Chapter. - Other | KGM | 6.5% | CCCT, LDCT |
| 39.11 | | Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms. | | | |
| 3911.10.00 | 00 | Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms.
- Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes | KGM | Free | CCCT, LDCT |
| 3911.90.00 | | Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms.
- Other | KGM | Free | CCCT, LDCT |
| 3911.90.00 | 10 | Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms.
- Other - To be employed in removing salts or water from crude petroleum oils; Hydrocarbon resins, excluding compositions and hydrocarbon resins with a number average molecular weight of less than 2,000, a mixed aniline point between 30°C and 60°C and a ring and ball softening point of less than 130°C as determined by ASTM E 28; Paratertiobutyl phenol disulfide polymer, for use in the manufacture of rubber pneumatic tires; Resin hardener, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generators | KGM | Free | CCCT, LDCT |
| 3911.90.00 | 90 | Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms.
- Other - Other | KGM | Free | CCCT, LDCT |
| 3921.90.11 | 00 | Other plates, sheets, film, foil and strip, of plastics. - Other - Combined with knitted or woven fabrics, nonwovens or felt, such combinations which can, without fracturing, be bent manually around a cylinder of a diameter of 7 mm, at a temperature between 15°C and 30°C: - Belting, of a thickness not exceeding 2.8 mm and a width exceeding 350 mm, reinforced with nylon, polyester or aramid fibres, for use in the manufacture of conveyor belts;Combined with felt, nonwovens or textile fabrics, with a leather-like coating solely of polyurethane on one or both sides, the weight of the coating being 20% or more of the total weight of the coated fabric, for use in the manufacture of footwear or handbags;Combined with woven fabrics of cotton, impregnated and coated with polymers of vinyl chloride, with the weight of the unimpregnated/uncoated fabric not exceeding 120 g/m² and the total weight of the impregnated/coated fabric exceeding 430 g/m² but not exceeding 470 g/m², for use in the manufacture of apparel;Combined with woven fabrics, solely of polyester staple fibres or of cotton mixed solely with polyesters or of polyester staple fibres mixed solely with cotton, for use in the manufacture of family or recreational tents of a floor area of 3 m² or more but not exceeding 21 m²;Plates, sheets or film of polymers of tetrafluoroethylene, combined with a woven fabric, to be employed in the production of chlorine or sodium hydroxide;Sheets of uncured phenol-formaldehyde resin or uncured epoxide resins, containing glass fibres, commonly known as "prepeg", for use in the manufacture of composite sandwich panels for aircraft, fast ferry ships and air transport shelters;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission belts | KGM | Free | CCCT, LDCT |
| 3921.90.91 | 00 | Other plates, sheets, film, foil and strip, of plastics. - Other - Other: - Of polymers of heading 39.02, excluding of polymers of propylene;Of polymers of heading 39.04, excluding of polymers of vinyl chloride, of polymers of tetrafluoroethylene or of polyvinylidene chloride;Of polymers of heading 39.05;Of polymers of heading 39.06, excluding of polymers of methyl methacrylate;Of polymers of heading 39.07, excluding of epoxide resins or of unsaturated polyesters, or poly(ethylene terephthalate) film of a width of less than 15 cm or polycarbonate plates, sheets, film or strip, of a thickness of 0.08 cm or more but not exceeding 1.3 cm;Of polymers of heading 39.09, excluding of urea-formaldehyde resins, of melamine-formaldehyde resins, of phenol-formaldehyde resins or of polyurethanes;Of polymers of heading 39.11 or 39.13;Of polymers of heading 39.12, excluding of regenerated cellulose, of vulcanized fibre or cellulose acetate and cellulose acetate butyrate sheets, film or strip, of a thickness exceeding 0.08 mm or of a width less than 15 cm and a thickness not exceeding 0.08 mm;Of polyvinylidene chloride to be employed in the packaging of goods for sale;Sheeting of glass fibre reinforced epoxide resin, whether or not in the form of ripple springs, electrically insulating or conductive, for use in the manufacture or refurbishing of electrical generators;Sheets, consisting of plain, coloured or decorated paper, coated or impregnated with melamine-formaldehyde resins, to be used as decorative surface coverings for particleboard, fibreboard or similar panel board products for the manufacture of furniture;Transmission belting, of a thickness not exceeding 6.8 mm, excluding belting of trapezoidal cross-section (V or multi V), whether or not embossed, for use in the manufacture of transmission belts | KGM | Free | CCCT, LDCT |
| 3923.10.10 | 00 | Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics. - Boxes, cases, crates and similar articles - For vaccines, toxoids (anatoxins), bacterins, toxins, serums containing immune bodies including antitoxins, glandular extracts or antibiotics, to be employed in the manufacture of such products;To be employed in the manufacture of goods of heading 38.08 or of goods of Chapter 28 or 29 in packages of a gross weight exceeding 1.36 kg each, for use as products having the same functions as the goods of heading 38.08 | - | Free | CCCT, LDCT |
| 3923.21.10 | 00 | Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics. - Sacks and bags (including cones): - Of polymers of ethylene - For vaccines, toxoids (anatoxins), bacterins, toxins, serums containing immune bodies including antitoxins, glandular extracts or antibiotics, to be employed in the manufacture of such products | - | Free | CCCT, LDCT |
Harmonized Tariff Schedule of the Canada inquiry: 65050
